3. END ITEM(S) OR SYSTEM(S) TO BE MODIFIED. This modification applies to all MIRPS.
Table 1. End Item to be modified.
4. MODULES(S), (COMPONENTS, ASSEMBLIES, SUBASSEMBLIES, BOARDS, AND
CARDS) TO BE MODIFIED. Not applicable.
5. PART(S) TO BE MODIFIED. The following item (s), whether installed or in PLL/ASL or dept
stock, shall be modified. Stocked parts shall be modified prior to issue and shall be marked so
that it can be easily determined that modification has been accomplished.
Type and Model
Pack Tray Assembly
Ripcord Grip Assembly
a. TIME COMPLIANCE SCHEDULE: The MWO effective date is 31 August 2003 and the
completion date is 31 August 2007.
b. LEVEL OF MAINTENANCE: Contractor.
c. WORK FORCE AND MAN-HOUR REQUIREMENTS: A total of 1.5 man-hours are
required for a single modification of the pack tray and installation of this MWO. Based on
contractor workload requirements and quantities received (from the user), the estimated
downtime per end item cannot be determined.
d. MWO TO BE APPLIED PRIOR TO, OR CONCURRENTLY WITH THIS MWO: Not