Once screw pin is seated and staked, it will not be removed
due to the synthetic locking device being compromised.
Slotted end of screw must face to the outside.
(5) With the slotted end of the bolt to the outside of the parachute harness, feed the screw pin
from the outside to the inside through the un-threaded hole to the threaded hole and completely
screw in the screw pin. It is recommended that a screwdriver blade the width of the screw pin be
used for better leverage and proper seating. Remember, the screw pin contains a synthetic
locking device and you must insure you completely seat the screw pin (Figure 3).
Slotted End of