TM 10-1670-268-20&P 0016 00
2. Remove the outrigger foot as follows:
a. Remove the quick release pin at the end of mast.
b. Remove shaft (bracket, eye, non-rotating shaft) to release foot.
3. Remove the outrigger mast as follows:
a. Remove quick release pin at pivot end of mast.
b. Remove shaft pivot pin.
c. Retract knob handles to release latch pins and remove mast from link, using handle provided.
4. Remove Weldment as follows:
a. Using either a ¾-inch wrench or socket, loosen side rail bolts (numbers 27-36).
b. Using a ¾-inch wrench or socket, loosen the four ½-inch diameter x 4 ½-inch cap bolts fastening
link to weldment.
c. Using a 9/16-inch wrench or socket, remove the 3/8-inch diameter x 4-inch bolts fastening
weldment to platform.
d. Remove ½-inch diameter x 4½-inch cap bolts fastening link to weldment. Remove weldment.