• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS OF THE TYPE V AIRDROP PLATFORM
Inside/Outside EFTA Brackets

TM-10-1670-268-20P The Type V Airdrop Platform and Dual Airdrop Platform Manual
Page Navigation
  5    6    7    8    9  10  11    12    13    14    15  
TM 10-1670-268-20&P                                              0002 00 0002 00-5 LOCATION AND DESCRIPTION OF MINOR COMPONENTS OF THE TYPE V AIRDROP PLATFORM These minor components are installed on the platform to accommodate specific modes of airdrop.  (Refer to the details below and the illustration on the following page.) NOTE The tandem link and suspension bracket are shown here to illustrate standard location when installed.  Refer to FM 4-20.102 (FM 10-500-2) for actual location of suspension bracket. Clevis Assembly.  The clevis assembly is a round rod that is curved to fit over side rail bushing.  It becomes a closed ring in shape when the spacer, bolt, washer and nut are installed across the open end of the clevis. Extraction Bracket Assembly.  The extraction bracket assembly is used to attach the extraction system to the platform.  The extraction bracket assembly consists of the frame, lug, bushings, bolts and washers.   The assembly fits over and is bolted to the rear panel assembly. CLEVIS ASSEMBLY EXTRACTION BRACKET ASSEMBLY







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.