24-FOOT DIAMETER TROOP CHEST RESERVE (T-10R) PARACHUTE AND MIRPS
ILLUSTRATED LIST OF MANUFACTURED ITEMS
This work package includes complete instructions for making items authorized to be manufactured or
fabricated at the unit maintenance level.
How to Use the Index of Manufactured Items
A part number index in alphanumeric order is provided for cross-referencing the part number of the item to be
manufactured to the page which covers fabrication criteria.
Explanation of the Illustrations of Manufactured Items
All instructions needed by maintenance personnel to manufacture the item are included on the illustrations.
All bulk materials needed for manufacture of an item are listed by part number or specification number in a
tabular list on the illustration.
Based on the manufacturer, the inside diameter of the PVC pipe may
vary. Purchases the PVC pipe prior to the fabrication of the 25-pound
weigh. Slight dimensional changes may be necessary to ensure the 25-
pound weight fits inside the PVC pipe. Failure to procure the PVC pipe
first may result in the improper fit of the 25-pound weight.
Drill, Electric, 5/8-IN Chuck (Item 27, WP 0044 00)
Pipe, PVC, 8-IN
Sheet Metal, Aluminum, 1/8-IN Thick
Rod, Aluminum, 3/8-IN Diameter
Test Set, Spring Compression (Composition of
assembled components listed above.)
Fabricate the test tube as follows:
1. Acquire a piece of pipe (PVC pipe) with an inside dimension of 8-inches (minimum). The outside
dimensions should be around 8 ½-inches.
2. Cut the pipe to a length of 36-inches and determine a top and bottom.