6. If the pack tray is used and a new T-10R or MIRPS ripcord grip pocket was applied, verify the
application procedures in WP 0029 00. If applied correctly, submit a PQDR for the new ripcord grip
pocket and ripcord grip.
7. If the MIRPS passes the 7-pound minimum and the T-10R and the MIRPS passes the 27-pound
maximum ripcord pull test, repack the T-10R IAW WP 0012 00 and the MIRPS IAW WP 0013 00.
8. Annotation completion of this test (test conducted, name of tester, date completed) on the notes page
of the parachute log record book (DA Form 3912), or applicable location in the NAVWPNCEN or
NAVWPNS CL 13512/11 (Parachute History Record).
RECEIPT OF USED PARACHUTE
Upon initial receipt of used parachute, proceed as follows:
1. Follow procedures given in this WP and check each component for excessive wear and tear.
2. If defects or damages are discovered, process the parachute for maintenance at the maintenance
level assigned by the Maintenance Allocation Chart (WP 0044 00).
When parachute is received at the maintenance activity following its use during air delivery, it must be
given a shakeout and aired (WP 0008 00), and, if necessary, cleaned (WP 0009 00) before it can be
returned to service. If a parachute is issued but not used, it does not need to be given a shakeout;
however, it must be aired if it has been subjected to conditions of dampness.
CHECKING UNPACKED EQUIPMENT AFTER SHIPMENT
Inspect equipment for damage incurred during shipment. If the equipment has been damaged, report the
damage on SF Form 364, Supply Discrepancy Report (SDR).
Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies
in accordance with the instructions in DA PAM 738-750.
Check to see whether the equipment has been modified.
END OF WORK PACKAGE