• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Harness Assembly (CONT) - TM-10-1670-271-23P_177
Figure 2-112.  Fabrication or Canopy Release Pad

TM-10-1670-271-23P Parachute Personnel Type: 35-Foot Diameter T-10B Troop Back Parachute Assembly NSN 1670-00-091-0720 Manual
Page Navigation
  157    158    159    160    161  162  163    164    165    166    167  
ARMY TM 10-1670-271-23&P AIR FORCE TO 14D1-2-464-2 MARINE CORPS TM 01136B-23&P/1 (d)    Pass  one  end  of  webbing  through  one  strap  adjuster,  through  backstrap  loops,  and  through  other strap adjuster (e)    Roll  each  webbing  end  to  form  five  plies.    Use  a  heavy  duty  sewing  machine  and  size  6,  nylon thread to sew a box formation on the rolled webbing, using 5 to 8 stitches per Inch. (f) Restencil date of manufacture and original date placed In service. Figure 2-111.  Replacement of Horizontal Back strap. (3) Canopy release pad.  Replace as follows: (a) Cut tacking and remove unserviceable canopy release pad. (b) Cut a piece of Type III nylon duck cloth 8 1/2 inches long and 5 3/8 inches wide (A, figure 2-112). (c) Fold cloth in half, aligning the 5 3/8-inch side, and stitch 1/2 Inch from edge on the 5 3/8-inch side and one of the 4 1/4-inch sides.  Use a light duty sewing machine, size E, nylon thread and 7 to 11 stitches per inch (B, figure 2-112). (d) Turn sleeve inside out. Change 1 2-153







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.