• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 2-121.  Installation of Horizontal Backstrap Retainer
Figure 2-123.  Fabrication of Backstrap Keeper

TM-10-1670-271-23P Parachute Personnel Type: 35-Foot Diameter T-10B Troop Back Parachute Assembly NSN 1670-00-091-0720 Manual
Page Navigation
  169    170    171    172    173  174  175    176    177    178    179  
ARMY TM 10-1670-271-23&P AIR FORCE TO 14D1-2-464-2 MARINE CORPS TM 01136B-23&P/1 Figure 2-122.  Installation of Diagonal Backstrap Keeper. (3)  Backstrap keepers.  Replace as follows: (a) Cut stitching and remove damaged keeper and loose threads. (b) Cut a 7 1/8-inch length of type VI nylon webbing (A, figure 2-123) and sear ends of webbing. (c) Fold one end under 1 inch and sew with a box X stitch formation, using a heavy duty sewing machine, size 3 nylon thread, and 5 to 8 stitches per inch. (d) Measure 2 3/4 inches from the seared end of the webbing.  Cut a 1 3/4-inch square piece of type III nylon duck and sear edges, place on the opposite side of the webbing from the folded end (B, figure 2-123). (e) Sew the duck in place using a heavy duty sewing machine, size 3 nylon thread and 5 to 8 stitches per inch. Change 2  2-165







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.