• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
PREPARING THE PARACHUTE FOR PROPER LAYOUT - TM-10-1670-272-23P_77
REMOVING TURNS, TANGLES/TWISTS FROM SUSPENSION LINES

TM-10-1670-272-23P Parachute Personnel Type: 35-Foot Diameter MC1-1B Troop Back Parachute Assembly NSN 1670-00-598-0751 Manual
Page Navigation
  49    50    51    52    53  54  55    56    57    58    59  
TM 10-1670-272-23&P                                                       0011 00 0011 00-8 1.    Skirt inversion.  Check to see that the vent cap is on the outside of the apex lines.  If the vent cap is on the inside of the apex lines, and the pocket bands are on the inside of the lower lateral band, the canopy is inverted through the skirt.  Remove an inversion through the skirt as follows: NOTE Be careful not to pass the apex out at the orifice, or around the radial lines at the orifice. a.    Remove canopy from apex hook. b.    Pass apex down through the canopy and out the skirt between the two adjacent suspension lines.







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.