• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 2-14.  Removing Twists.
Figure 2-16.  Attaching Deployment Bag with Breakcord

TM-10-1670-275-23P Parachute Cargo Type: 12-Foot Diameter High-Velocity Cargo Parachute NSN 1670-00-788-8888 Manual
Page Navigation
  32    33    34    35    36  37  38    39    40    41    42  
ARMY TM 10-1670-275-23&P AIR FORCE TO 13C5-25-2 NAVY NAVAIR 13-1-26 2-16.  Packing 12-Foot Cargo Parachute (cont). 4706-022 Figure 2-15.  Suspension Line Separation. i. Assembling Components. NOTE When  the  parachute  is  received  from  the  supply  activity  and  before  it  is packed   for   use,   the   components   must   be   assembled.      This   must   be accomplished  during  the  layout  of  parachute  (para.  2-16c)  after  removing inversion, turns, tangles or twists, if required. In assembling components, if any component is found to be defective, parachute must be processed for repair.  Place components on the packing table and obtain proper layout of canopy   assembly;   then   assemble   components   in   accordance   with   the following. (1)  Attaching Deployment Bag. NOTE The  canopy  is  attached  to  deployment  bag  attaching  loop  with  either  a breakcord or a bag retaining tie. 2-30







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.