TM 10-1670-277-23&P 0033 00
28-FOOT DIAMETER CARGO EXTRACTION PARACHUTE
ADAPTER WEB FIXED KEEPER
0033 00-1/(2 Blank)
THIS TASK COVERS:
Knife (Item 5, WP 0056 00)
Sewing Machine, Heavy-Duty (Item 20, WP 0056 00)
Shears (Item 24, WP 0056 00)
Tape, Pressure-Sensitive, Type III, 1-IN. (Item 21, WP 0065 00)
Thread, Nylon, Size 6 (Item 28/29, WP 0065 00)
92R (10) Parachute Rigger
Cleaned (WP 0008 00).
Inspected (WP 0009 00).
Laid out on work table.
WP 0012 00
Stitch and restitch with size 6 nylon thread, that matches the color of the original stitching, when possible.
Lock all straight stitching by backstitching at least ½-inch. Restitch by overstitching each end of the stitch
formation by ½-inch. Restitch directly over the original stitching; follow the original stitch pattern as closely as
possible. Stitch according to WP 0012 00 and Table 2, WP 0012 00, SEWING PROCEDURES.
Replace a damaged fixed webbing keeper by fabricating as follows:
1. Remove an unserviceable fixed webbing keeper by cutting the stitching that secures the keeper to the
2. Restitch the original fixed keeper area on the adapter web according to original construction details, using
a heavy-duty sewing machine, 4 to 6 stitches per inch, and size 6 nylon thread.
3. Cut a length of 1-inch wide type III filament-reinforced pressure-sensitive tape long enough to make three
turns around the adapter web.
4. Wrap the tape length tight around the adapter web in the original fixed keeper location.
END OF WORK PACKAGE