• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 2-62. Retainer Band Keeper Reinforcement Replacement Details.
Figure 2-63. Tie Loop and Tie Loop Reinforcement Replacement.

TM-10-1670-279-23P Parachute Cargo Type: 22-Foot Diameter Cargo Extraction Parachute NSN 1670-01-063-3716 and NSN 1670-00-687-5408 Manual
Page Navigation
  114    115    116    117    118  119  120    121    122    123    124  
ARMY TM 10-1670-279-23&P AIR FORCE T.O. 13C5-27-2 NAVY NAVAIR 13-1-28 2-41. Deployment Bag Tie Loop and Tie Loop Reinforcement. This task covers: a.  Repair b.  Replace Tools: Personnel Required: Knife, Item 4, Appendix B 43E(10) Parachute Rigger Knife, Hot Metal, Item 5, Appendix B Sewing Machine, Medium Duty, Item 19, Equipment Condition: Appendix B Shears, Item 14, Appendix B Cleaned, paragraph 2-12 Yardstick, Item 24, Appendix B Inspected, paragraphs 2-9, 2-13 Laid out on work table Materials/Parts: Reference: Thread, Nylon, Size FF, Item 28129, Appendix D Group No. 02, MAC, Section II, Webbing, Nylon, Type IV, 1-Inch, Appendix B Item 36, Appendix D Webbing, Nylon, Type IV, 1-112-Inch, Item 38, Appendix D a. Repair. Stitch and restitch with size FF thread which matches the color of the original stitching, when possible. Lock all straight stitching by backstitching at least 1/2 inch. Restitch by overstitching each end of the stitch formation by 1/2 inch. Restitch directly over the original stitching, following the original stitch pattern as closely as possible. Stitch according to para. 2-18 and table 2-3. b. Replace. When either a tie loop on bag inside or a tie loop reinforcement on bag outside is damaged, the replacement action will include both items. Replace a tie loop and tie loop reinforcement by fabricating as follows (figure 2-63): (1)   Remove applicable original tie loop and tie loop reinforcement by cutting stitching that secures both items to deployment bag. (2)   Cut a 10-inch length of 1-inch wide, type IV nylon webbing and a 3-inch length of 1 1/2-inch wide, type IV nylon webbing. Sear ends of both webbing lengths according to para. 2-19. (3)   Make a 1/2-inch long turnunder on each end of 3-inch webbing length and position folded webbing in original tie loop reinforcement location on deployment bag outside with turnunder ends facing down. Secure replacement reinforcement to deployment bag out- side by making a single row of stitching, 1/8 inch in, along each outside edge (A, figure 2-63), using a medium-duty sewing machine and size FF nylon thread. Stitching will be 7 to 11 stitches per inch. 2-110







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.