TM 10-1670-280-23&P 0013 00
c. Cut four 12-foot lengths of ½-inch wide tubular nylon webbing and tape 2-inches of the ends of each
webbing length with masking tape.
d. Rotate the reefing line cutter at line 61 upward and pass one end of a 12-foot reefing line from left to
right through the hole in the reefing line cutter. Pull 6-inches of the reefing line through cutter.
e. Using the 6-inch length of the reefing line, make a slip knot immediately to the right of the reefing line
cutter to secure the reefing line during the reefing process.
Position a large pedestal fan at a point 10-feet below the canopy skirt. Position the fan so the air
stream will partially inflate the canopy.