TM 10-1670-280-23&P 0032 00
100-FOOT DIAMETER CARGO PARACHUTE
PARACHUTE INSPECTION DATA POCKET
0032 00-1/(2 Blank)
THIS TASK COVERS:
Needle, Tacking (Item 13, WP 0050 00)
Sewing Machine, Light-Duty (Item 22, WP 0050 00)
Sewing Machine, Zig-Zag (Item 24, WP 0050 00)
Thread, Cotton, Ticket No. 8/7 (Item 36, WP 0059 00)
Thread, Nylon, Size E (Item 41/42, WP 0059 00)
92R (10) Parachute Rigger
Cleaned. (WP 0008 00)
Inspected (WP 0009 00)
Unpacked, laid flat on repair table.
WP 0014 00
The inspection data pocket is located on the bridle loop of the older
model G-11Bs that were previously G-11As, and on a riser of the G-
11B, G-11C, and G-11Ds.
Stitch and restitch with size E nylon thread which matches the color of original stitching. Lock all straight
stitching by backstitching at least ½-inch. Restitch directly over the original stitching, following original stitch
pattern as closely as possible, according to the specifics in Table 2, STITCHING AND RESTITCHING
SPECIFICATIONS, WP 0014 00. Retacking will be performed using a tacking needle and two turns of
double, ticket No. 8/7 waxed cotton thread at each tacking point.
Replace an unserviceable or missing parachute inspection data pocket with a serviceable item from stock.
Tack in place at original tacking points using the specifics in REPAIR, above.
END OF WORK PACKAGE