TM 10-1670-280-23&P 0011 00
0011 00-32
13. Making locking stows.
CAUTION
Failure to remove the packing aid will cause total malfunction of the
parachute.
a. Cut a 36-inch length of ½-inch wide tubular nylon webbing, or equivalent, for use as packing aid in
making the locking stows. Double the webbing length and make an overhand knot in the aligned
ends.
b. Fold the suspension lines and center line back over the large end flap. Measure and form a loop in
the lines that will extend to the right edge of the bag large flap.
c. Using the packing aid, encircle the formed loop in the suspension lines and make girth hitch in the
packing aid.
d. Thread the knotted end of the packing aid through the locking stow loop located under the protector
flap sleeve at the lower right corner of the deployment bag.
e. Pull the suspension line formed loop until the loop is aligned with the right edge of the bag large end
flap.