• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Wrapping the suspension lines
Stowing the suspension lines and suspension risers cont. - TM-10-1670-280-23P_97

TM-10-1670-280-23P Parachute Cargo Type: 100-Foot Diameter Model G-11B G-11C and G-11D NSN 1670-01-016-7841 Manual
Page Navigation
  67    68    69    70    71  72  73    74    75    76    77  
TM 10-1670-280-23&P                                                       0011 00 0011 00-36 b.    Secure each lower outside corner of the suspension line protector flap to the deployment bag by hand tacking using one turn single, orange cotton thread ticket No. 8/4 at each tacking point.    c.    Pass the tacking needle through the deployment bag outside edge of the reinforcement strap and the protective flap edge reinforcement.    d.    Secure the tacking ends at each tacking point with a surgeon’s knot and locking knot.    e.    Trim tie ends to 2-inches. 17. Stowing the suspension lines and suspension risers. a.    Extend the running end of the suspension lines and center line to the upper right corner of the deployment bag.    b.    Measuring to the right edge of the stowage compartment, form the first suspension line stow by making a loop in the suspension lines. c.    Secure the first suspension line stow to the upper right outside strap loop using the first stow tie.    d.    Secure the stow tie with a surgeon’s knot and locking knot. e.    Rigger check number 5. f. Extend the running end of the suspension lines across the deployment bag to the upper left corner of the bag.    g.    Measuring to the left edge of the stowage compartment, form the second suspension line stow by making a loop in the suspension lines.







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.