• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
111-inch Long Deployment Line
68-Inch Pilot Parachute CONT.

TM-10-1670-281-23P Parachute Cargo Type: 64-Foot Diameter Model G-12D NSN 1670-00-893-2371 and Model G-12E NSN 1670-01-060-3705 Manual
Page Navigation
  213    214    215    216    217  218  219    220    221    222    223  
ARMY TM 10-1670-281-23&P AIR FORCE T.O. 13C5-32-2 NAVY NAVAIR 13-1-32 2-52.  68-Inch Pilot Parachute. This task covers:    a. Inspect              b. Service             c. Repair              d. Replace- Tools: Materials/Parts (cont): Knife, Item 4, Appendix B Cord, Nylon, Type II, Item 12, Appendix D Knife, Hot Metal, Item 5, Appendix B Cord Nylon, Type III, Item 14/15, Appendix D Screwdriver, Item 22, Appendix B Marking Aid, Item 25/26, Appendix D Sewing Machine, Darning, Item 20, Appendix B Thread, Nylon, Size E, Item 39/40, Appendix D Sewing Machine, Light-Duty, Item 16, Appendix B Thread, Nylon, Size FF, Item 41, Appendix D Sewing Machine, Zig-Zag, Item 17, Appendix B Webbing Nylon Type 1, 9/16-inch, Item 52/53, Separator, Link, Item 23, Appendix B Appendix D Splicing Aid, Item 25, Appendix B Webbing, Nylon, Type IV, 1 -inch, Item 61, Appendix D Materials/Parts: Equipment Condition: Cloth, Nylon, Parachute, Type I, 11 oz.. Item 9, Cleaned, Paragraph 2-12 Appendix A Inspected, Paragraph 2-9, 2-13 Cloth, Nylon, Parachute, Type II, 1.6 oz, Item 10, Laid out on work table Appendix D a.  Inspection. Inspect a 68-inch-diameter pilot parachute used with G-12D and G-12E 64-foot-diameter cargo parachutes in accordance with paragraphs 2-9 and 2-13, using the procedures in table 2-1. b. Service. Service a 68-inch-diameter pilot parachute by cleaning and drying the canopy and associated parachute components in accordance with paragraph 2-12. c. Repair. CAUTION When  performing  a  repair  on  a  68-inch-diameter  pilot-parachute  canopy  which requires  the  cutting  of  stitching  of  an  original  part,  insure  that  adjacent  canopy material is not damaged during the cuffing process. (1)  Parachute connector link assembly. (a) Repair.  Repair a parachute connector link assembly as outlined in paragraph 2-32. As required, tighten the connector link screws using a suitable size flat-tip (common-head) screwdriver. (b) Replacement.  Replace an unserviceable parachute connector link assembly with a serviceable item from stock, using the procedures in paragraph 2-32. 2-194







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.