ARMY TM 10-1670-281-23&P
AIR FORCE T.O. 13C5-32-2
NAVY NAVAIR 13-1-32
(3) Modification work order compliance record page. When a modification is performed on a parachute
canopy, the following entries will be made on the "Modification Work Order Compliance Record" pages of the
Log Record (figure 2-4).
Figure 2-4. Log Record Entries for the Modification Work Order Compliance Record Page.
(a) MWO number. Enter the publication number and date of the Modification Work Order
(MWO) which describes the MWO (1, figure 2-4).
(b) MWO title. Enter a short, abbreviated title extracted from the MWO prescribing the work.
(c) Modified by. Enter-the last name of the individual who has performed the modification. If the
original log record for the parachute has been lost, and it has been ascertained through inspection that a
particular modification has been accomplished, the entry for this column will be C/W "Complied With" (2, figure
2-4), which signifies the applicable MWO has been complied with.
(d) Inspected by. The individual who accomplished the inspection required after modification will
sign this entry with his last name only.
(e) Unit. Enter the unit designation responsible for performing the MWO or, in the event of a lost
Log Record, the unit to which the inspector is assigned.
(f) Date. Enter the day, month, and year the modification- work was completed.
(4) Unit and intermediate repair and inspection data. When a parachute canopy assembly is initially
received from a supply source and a technical/rigger-type inspection is performed, the inspection
accomplishment will be documented on the "Unit and Intermediate Repair and Inspection Data" page of the
individual Parachute Log Record (figure 2-5). Additional entries will also be made on this page each time the
canopy assembly is repaired or is administered an inspection in compliance with a one-time inspection
Technical Bulletin (TB). The page completion criteria is as follows:
(a) Type of repair. Enter the type of repair, completion of initial inspection, repair
accomplishment, Technical Bulletin Inspection compliance.
(b) Inspection by. The individual who accomplished the inspection required will sign this entry
with last name.