EXTRACTION LINE PANEL PROCEDURES FOR C-17 GLOBEMASTER III
EXTRACTION PARACHUTE DEPLOYMENT BAG
a. Remove the deployment bag bridle loop from the deployment bag and sear ends (figure 1).
Figure 1. Deployment Bag Modification.
b. Cut two 24-inch lengths of type VIII nylon webbing (sear the cut ends).
c. Form a 4-inch roll in the center of each strap. Stitch around the roll and across the center of the
roll with size 3 nylon thread (figure 2).
Figure 2. Bridle Straps Formed.
d. Where the type VIII reinforcement webbing intersects the 1½-inch reinforcement tape (located at
the bottom end of the d-bag), measure up 5-inches and mark each side (figure 3).
Bridle Loop Strap