EXTRACTION LINE PANEL 0005 00
STOWING 60-FOOT ONE LOOP EXTRACTION LINE TO EXTRACTION LINE PANEL
e. Starting at center of panel, stow upper half of extraction line on left side of panel. S-fold/stow extraction
line lengthwise on panel and secure with a retainer band continue stowing extraction line until approximately
one foot of extraction line exceeds from upper left corner of panel.
Figure 3. Stowing 60 FT. One Loop Extraction Line.
3. Fold panel, lace ends and install ties.
a. Cut 16 x 36-inch piece of Kraft paper and use as line separator. Place line separator on top of right
half of stowed extraction line (figure 4).
b. Fold left of panel over line separator forming half bag (figure 5).