• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REPLACING CROSSPORT
UNIT MAINTENANCE MC-4 RAM AIR FREE-FALL PERSONNEL PARACHUTE SYSTEM STABILIZER LEFT OR RIGHT, MAIN OR RESERVE CANOPY CONT.

TM-10-1670-287-23P MC-4 RAM Air Free-Fall Personnel Parachute System NSN 1670-01-306-2100 Manual
Page Navigation
  220    221    222    223    224  225  226    227    228    229    230  
TM 10-1670-287-23&P 0028 00 UNIT MAINTENANCE MC-4 RAM AIR FREE-FALL PERSONNEL PARACHUTE SYSTEM STABILIZER LEFT OR RIGHT, MAIN OR RESERVE CANOPY 0028 00-1 THIS TASK COVERS: Replace INITIAL SETUP: Tools Sewing Machine, Bartack (Table 1, WP 0015 00) Sewing Machine, Double Needle (Table 1, WP 0015 00) Sewing Machine, Light-Duty (Table 1, WP 0015 00) Shears (Item 39, WP 0063 00) Materials/Parts Stabilizer, Left (Item 13, WP 0068 00) Stabilizer, Right (Item 12, WP 0068 00) Tape, Nylon, 2-IN. Wide (Item 35, WP 0076 00) Thread, Nylon, Size E (Item 43/44, WP 0076 00) Personnel Required 92R (10) Parachute Rigger Equipment Condition Layout on packing table or other   suitable area. REPLACE 1.    Carefully cut and remove the bartack securing the suspension lines to the stabilizer. 2.    Carefully cut and remove the bartack securing the stabilizer. 3.    Remove the stabilizer. 4.    Obtain a replacement stabilizer from supply. 5.    If the new stabilizer does not have the 2-inch nylon tape on both sides, apply the tape on the two (2) most forward slider stops (B & C line only) using the following procedures: a.    Cut a 9-inch piece of 2-inch nylon tape.  Measure and fold webbing under 2 ½-inches from each end forming a 4-inch length. 4-INCHES







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.