2. Place replacement ripcord pocket in position on container directly over position of removed pocket.
Pocket is installed under tape on outside edge of container.
3. Using a light-duty sewing machine and size E nylon thread, sew in place on inside and outside edges
of container using two (2) rows of stitching, 7 to 11 stitches per inch.
4. Reinforce the four (4) corners with either a zig-zag or bartack sewing machine (type 308 stitching),
size E nylon thread, 8 to12 stitches per inch.
5. Perform follow-up procedure (WP 0014 00).
END OF WORK PACKAGE