(DO NOT OVERLAP)
2. Cascaded Suspension Lines. Replace cascaded suspension lines as follows:
a. Lay replacement cascaded line on top of main line in same location as old line. Secure cascaded
line to main line with two 5/8-inch by 1/8-inch bartack, located 1/8-inch apart. Sear cut cascaded
line 1/16-inch from end of bartack.
b. Tie free end of cascaded line to canopy attachment loop with a French locking knot. Adjust line to
proper trim using other lines in-group as reference.
c. When adjusted, lay free end of line on top of main line and secure with a 5/8-inch by 1/8-inch
bartack placed as close to knot as possible. Trim line 1/16-inch from bartack.
French Locking Knot