• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
DIRECT SUPPORT MAINTENANCE MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY   VENT LINES CONT.
DIRECT SUPPORT MAINTENANCE MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY   GORE SECTIONS CONT.

TM-10-1670-292-23P Parachutes Personnel Type: 35-Foot Diameter MC1-1C Troop Back Parachute Assembly NSN 1670-01-262-2359 Manual
Page Navigation
  214    215    216    217    218  219  220    221    222    223    224  
TM 10-1670-292-23&P                                                          0036 00 DIRECT SUPPORT MAINTENANCE MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY   GORE SECTIONS 0036 00-1 THIS TASK COVERS: = Replace INITIAL SETUP: Tools Knife (Item 13, WP 0042 00) Needle, Basting (Item 18, WP 0042 00) Sewing Machine, Light-Duty (Table 1, WP 0012 00) Sewing Machine, Darning (Table 1, WP 0012 00) Shears (Item 28, WP 0042 00) Materials/Parts Brush, Stenciling (Item 4, WP 0055 00) Cloth, Parachute Mending (Item 11, WP 0055 00) Cloth, Parachute, Nylon, 1.1-oz. (Item 12/13, WP 0055 00) Thread, Cotton (Item 48, WP 0055 00) Thread, Nylon, Size A (Item 51, WP 0055 00) Thread, Nylon, Size E (Item 49/52, WP 0055 00) Stencil Board, Oiled (Item 35, WP 0055 00) Pushpins (Local Purchase) Personnel Required 92R(10) Parachute Rigger Equipment Condition Parachute canopy laid out on table. References Group No. 01, MAC (WP 0045 00) REPLACE When replacing gore sections, use F-111 pattern, nylon cloth of same color as that being replaced.  If the same color cloth is not available, another color may be used.  When replacing section 1 of gore 1, restencil the gore number and information data block on the replacement section.  For other gores, stencil gore numbers as necessary. NOTE Mending cloth will be used for patching only. 1.    Section 3 or 4.  Replace as follows (see illustrations on next page):







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.