c. Secure both pack tray horizontal back-strap-retainers over the horizontal back-strap, as
illustrated on the previous page.
d. Secure the pull-dot snap fasteners.
2. Risers. Attach the risers to the MC1-1C/MC1-1D harness as follows:
a. Lay the parachute harness down, with the female fittings of the harness near the male fittings
of the risers.
b. Fit heel of male fitting into groove of female fitting.
c. Fit toe of male fitting into slot of female fitting, close latch, and ensure the latch is securely