TM 10-1670-292-23&P 0011 00
e. Slide the loop down to the bottom of the snap hook until the static line is fully seated in the indent
on the side of the snap hook; form a taut girth-hitch.
Ensure there is no twists in the static line snap hook loop.
Before forming the girth-hitch, the green ID marking thread on the
15-foot static line and the 5-foot extension (for 20-foot configuration)
must be on top.
3. Attaching the USL 5-foot extension to the USL 15-foot USL configuration.
a. Attach the USL snap hook to the 5-foot extension as stated in paragraph 2 above.
b. Pass the 3½-inch loop, on the 15-foot static line, through the 2-inch buffer loop, on the static line
extension (for the 20-foot configuration).