T-10C/T-10D TROOP BACK PARACHUTE ASSEMBLY
THIS TASK COVERS:
Knife (Item 14, WP 0039 00)
Knife, Hot Metal (Item 15, WP 0039 00)
Sewing Machine, Light-Duty (Table 1, WP 0012 00)
Sewing Machine, Medium -Duty, Zig-Zag (Table 1,
WP 0012 00)
Shears (Item 29, WP 0039 00)
Webbing, Nylon, Type I, 9/16-in. (Item 58, WP 0053 00)
Thread, Nylon, Size E (Item 47/44, WP 0053 00)
92R(10) Parachute Rigger
Unpacked. Laid flat on repair table.
Group No. 01, MAC (WP 0042 00)
Stitch and restitch with nylon thread, that is the same size and contrasting in color to the original stitching,
whenever possible. Lock all stitching by back stitching at least ½-inch. Restitch over the original stitch
Replace as follows:
1. Cut a 5-inch length of 9/16-inch-wide, type I, nylon webbing. Fold the webbing in half, cut the free ends
on a 45-degree bias; sear the ends.
2. Position the canopy on the repair table, with the V-portion of the damaged tab up.