TM 10-1670-293-23&P
0027 00
m. Tie the ends of the lacing with a surgeons knot and a locking knot.
4. Ejector snap pad. Replace as follows:
a. Cut the tacking and remove the damaged ejector snap pad.
b. Cut a piece of type I, 3/16-inch-thick felt, 6-inches-long and 4-inches-wide; round all the corners on
a ¼-inch radius.
c. Cut two pieces of olive green, type III nylon cloth, 6-inches-long and 4-inches-wide. Round all the
corners on a ¼-inch radius.
Change 1
0027 00-8