• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Ring Strap Assembly cont. - TM-10-1670-299-20P_177
RELEASE ASSEMBLY

TM-10-1670-299-20P Ancillary Equipment fro Personnel Troop Parachute System Manual
Page Navigation
  163    164    165    166    167  168  169    170    171    172    173  
TM 10-1670-299-20&P TO 14D1-2-470-2 NAVAIR 13-1-41 (14)  Extension Sling.  Replace damaged extension sling, D-Ring, and 4 inch length of Type X nylon webbing as follows: (a)  D-Ring and 4 inch nylon webbing.  Replace damaged D-Ring (1) and 4 inch nylon webbing (2) as follows: 1    Cut  stitching  from  hook  fastener  (3)  on  D-  Ring  end  of  extension  sling  (4),  remove  and  set  aside fastener.  Cut  stitching  (5)  that  supports  D-Ring  (1)  and  4  inch  nylon  webbing  (2)  and  remove  D-Ring  and  webbing. Replace  D-Ring  (1)  with  a  serviceable  item.    Replace  4  inch  webbing  with  a  4  inch  length  of  Type  X  woven  nylon webbing. 2  Sew D-Ring and hook fastener to extension sling as shown using size 3 thread, 5 to 8 stitches per inch and a type HD sewing machine. (b)    Extension  sling  (6)  and  retaining  strap  (7).    Replace  damaged  extension  sling  and  retaining  strap  as follows: 1  Cut extension sling (6) from pack body (8). 2    Follow  step  (a)  above  for  replacing  D-Ring  and  4  inch  webbing  except  discard  damaged  extension sling (6) and replace with 78 inch length of 1 inch woven nylon webbing. Replace 3 1/2 inch webbing retainer (7) with a 3 1/2 inch length of Type II woven nylon webbing. 3  Sew sling as shown and as in (a) 2 above. 2-147







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.