(2) Flap Assembly V-Ring Harness. To replace the V-Ring (1) and webbing (2) proceed as follows:
a Cut stitching (3) holding type VII webbing (2) to flap assembly (4). Remove V-Ring (1) from
damaged webbing (2) and retain if serviceable.
b Cut a 19 inch length of type VII nylon webbing (1) and sear both ends. Threat serviceable V-Ring (1)
onto webbing (2). Fold as shown and place on flap assembly (4) as in original construction.
c Sew as shown using size 5 thread, 5 to 7 stitches per inch and a type HD sewing machine