Operating Procedures - Continued
Air-to-Air Control of System - Continued
Enable", and the "Flare" switch combination, is that the
controls will latch in the "Flare" mode and the T/C must be
cycled to OFF and then ON to return the ARABS system
to full flight.
(f) After Landing. Attempt to land as close as safely possible to
the load, and follow the recovery procedures as outlined in
paragraph 2-9 of this manual.
Do not allow your canopy to fly in front of the ARABS system or
behind it any closer than 50 meters. Turbulence behind the
ARABS parachute at about a 45 angle can cause your canopy
to partially collapse.