• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
EQUIPMENT DISPOSITION cont'd
In-process Rigger Checks Reserve Parachute

TM-10-1670-327-23-P MC-6 Personnel Parachute System NSN 1670-01-527-7537 Manual
Page Navigation
  91    92    93    94    95  96  97    98    99    100    101  
TM 10-1670-327-23&P
0013 00
UNIT MAINTENANCE
MC-6 PERSONNEL PARACHUTE SYSTEM
NSN 1670-01-527-7537
RESERVE CANOPY
INSPECT
INITIAL SETUP:
Tools
Personnel Required
None required
92R (10) Parachute Rigger
Materials/Parts
Equipment Condition
None required
Packed IAW WP 0016 00
INSPECT
Routine Inspection
A routine inspection is a visual check performed to ascertain the serviceability of all visible components of
a parachute that is packed or rigged for use. The inspection will be made on all components that can be
inspected without opening the parachute pack. Prior to issue, a parachute rigger will administer this
inspection. Personnel parachutes issued for an air delivery operation and not deployed will receive a
routine inspection prior to being placed into ready-for-issue storage.
Pack-In-Process Inspection
A pack-in-process inspection is performed at specified intervals during the packing of a parachute to
ensure that only authorized procedures and methods are being used. A parachute rigger other than the
packer or rigger preparing the applicable equipment for use will accomplish the inspection. The intervals,
at which the inspection is performed, are as follows:
WARNING
Deployment bag will be given a complete inspection,
including static line and that portion of the static line that is
covered by the static line sleeve. Failure to do so could
result in serious injury or death to the parachutist.
NOTE
For Army personnel, the In-Process-Inspector (IP) qualifications are IAW AR 750-32.
0013 00-1






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.