18. Fine dress the lower lateral band and anti-inversion net. Start with the left group of gores (figure 26,
item 1), dress each gore section from the anti-inversion net to the second section. When the bottom
extended gore is reached, dress the excess material (figure 26, item 2). Repeat for right side.
19. Move to the top of section 3. Fine dress the aft and forward extended gore on left side. Pull excess to
the apex and position open edge to the air channel. Clear upper control lines and place in air channel.
Ensure extended gore line limiter is clear and placed toward the apex. Fold outside edge of the
20. Fold excess material of extended gores even with remaining gores.
21. Repeat for right side.
Figure 26. Dressing the Extended Gores.