REPLACE - continued
4. Cut out a new section so the ends may be sewn together, using the method shown in figure 5, part C
and D, as a guide. Use a medium duty zig-zag sewing machine, 7 to 11 stitches per inch, 1/8-inch
wide throw to sew the ends together. Use a heavy duty, zig-zag sewing machine, 7 to 11 stitches per
inch, 1/8-inch wide throw to sew the net to the suspension line loop.
(Only repair stitching shown)
(D) Repair to vertical cords
(C) Repair to net when defect is less
attached to top cord
than 1-inch from suspension line
Figure 5. Cut Out New Section so Ends may be Sewn Together.
END OF WORK PACKAGE