• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 1. Main Riser Control Line Guide Channel.
Figure 1. Lay Pack Tray On Pack Table.

TM-10-1670-327-23-P MC-6 Personnel Parachute System NSN 1670-01-527-7537 Manual
Page Navigation
  279    280    281    282    283  284  285    286    287    288    289  
TM 10-1670-327-23&P
0044 00
UNIT MAINTENANCE
MC-6 PERSONNEL PARACHUTE SYSTEM
NSN 1670-01-527-7537
MAIN PACK TRAY
REPAIR, REPLACE
INITIAL SETUP:
Tools
Personnel Required
Sewing Machine, Light Duty (Item 56, WP 0097
92R (10) Parachute Rigger
00)
Sewing Machine, Medium Duty, Zig Zag (Item 57,
WP 0097 00)
Sewing Machine, Heavy Duty (Item 55, WP 0097
00)
Materials/Parts
Equipment Condition
Thread, Nylon, Size E (Item 51, WP 0109 00)
Lay out on packing table or other suitable area.
REPAIR
Restitching. Restitch main pack tray using a light duty sewing machine and size E nylon thread that
contrasts the color of the original stitching and material when possible. Restitch directly over the original
stitch pattern as closely as possible with 7 to 11 stitches per inch. Lock each row of stitching 2 inches at
each end.
If bartack stitching requires repair, bartacks will be completely removed and a new bartack will be
replaced with the same stitch length and width.
Darn Main Pack Tray
NOTE
For darning holes, repair of holes are limited to 3/4-inch in diameter.
Refer to WP 0017 00 for General Parachute Repairs procedures.
Repair Main Pack Tray
Refer to WP 0017 00 "General Parachute Repair" for patching. Refer to applicable work packages for
additional items needing repair.
0044 00-1






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.