2. Repair gore sections 4 and 5 IAW patching procedures detailed in WP 0017 00 and the following
4-sided patches only with square corners.
No patch larger than 8-inch by 8-inch is authorized. Any damage that requires a patch larger
than 8-inch by 8-inch will require a section replacement.
Sections 4 & 5 (1.5 oz material), maximum of 1 patch per section providing the patch it is not
within 1-inch of a main seam. Damage closer than 1-inch of the main seam will require the
entire reserve assembly to be replaced.
END OF WORK PACKAGE