REPLACE - continued
Replace Static Line
When laying out the static line to form the girth hitch, ensure the green ID marking thread
of the webbing is on the top.
1. Attaching the static line to the deployment bag.
a. Position the deployment bag (figure 2, item 1) with the stow loops facing up and pass the 6-inch
buffer loop (figure 2, item 2) of the static line clockwise, halfway through the break cord attaching
strap loop (figure 2, item 3).
Figure 2. Position The Deployment Bag With The Stow Loops Facing Up.
b. Pass the 3-1/2-inch loop end of the static line (figure 3, item 1) through the 6-inch buffer loop
(figure 3, item 2), counterclockwise until a taut girth hitch is formed.
Figure 3. Static Line Through The 6-Inch Buffer Loop.