• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 2. Position The Deployment Bag With The Stow Loops Facing Up.
Figure 7. Pass Top Of Snap Hook Through Static Line Loop.

TM-10-1670-327-23-P MC-6 Personnel Parachute System NSN 1670-01-527-7537 Manual
Page Navigation
  389    390    391    392    393  394  395    396    397    398    399  
TM 10-1670-327-23&P
0087 00
REPLACE - continued
c.
Secure the static line (figure 4, item 1) to the deployment bag (figure 4, item 2).
2
1
Figure 4. Secure Static Line To Deployment Bag.
2. Attaching the snap hook to the static line and the USL 5-foot extension.
a. Position the snap hook (figure 5, item 1) so the opening is facing outward. Lay the static
line(figure 5, item 2) flat on the packing table; ensure the green ID marking thread is on top and
on the outside of the loop.
1
2
Figure 5. Position The Snap Hook.
b. Pass the 3-1/2-inch loop end of the static line (figure 6, item 1) through the opening in the base
of the snap hook (figure 6, item 2), from bottom to top.
1
2
Figure 6. Pass The 3-1/2-inch Loop End of Static Line Through Opening of Snap Hook.
0087 00-3






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.