TM 10-1670-268-20&P 0017 00
0017 00-4
1. After the initial installation of the outrigger assembly, the mast and foot assembly should be removed
so that the platforms can be stacked for storage. With the link and weldment installed on the
platform, the distance between the platforms needed for stacking is a minimum six inches. The mast
and foot assembly can be stored separately. At the time loads are being rigged, it is recommended
that the outrigger mast and foot assemblies be attached last in the rigging process.
2. Dual Row Airdrop Platform Assemblies may be neatly stacked up to ten high providing that a
minimum of three wooden spacers, with an actual lumber dimension of 6-inches by 6-inches by 84-
inches long, are positioned as follows:
a. Place one wooden spacer in the center of the platform.
b. Place one wooden spacer in the center of the first platform panel.
c. Place one wooden spacer in the center of the last platform panel.
d. The bottom platform shall be supported in the same fashion as the platforms stacked on top of it.
e. Platforms will be stored with wooden spacers in position.
ADMINISTRATIVE STORAGE
Administrative storage represents a short-term period with duration of 1 to 45 days. It covers storage of
equipment, which can be prepared for mission within 24-hours. Before placing the platforms in
administrative storage, perform preventive maintenance checks and services and correct all known
deficiencies.
END OF WORK PACKAGE
