TM 10-1670-268-20&P 0001 00
0001 00-5/(6 Blank)
LIST OF ACRONYMS AND ABBREVIATIONS - Continued
TB
Technical Bulletin
TDR
Transportation Discrepancy Report
TMDE
Test, Measurement and Diagnostic Equipment
UOC
Usable on Code
WP
Work Package
SAFETY, CARE AND HANDLING
The following subparagraphs summarize the safety, care and handling requirements for the type V
and dual row platform assembly.
The type V platform weighs approximately 100-pounds per foot of length. Use extreme caution in
lifting and handling.
The dual row platform weighs approximately 89-pounds per foot of length. Use extreme caution in
lifting and handling.
Safety. Use care in handling platforms as exposed metal parts could cause painful injuries.
Never walk near or crawl beneath raised platforms. Do not use fingers to align bolt holes. Steel toe
boots are highly recommended when working with the type V and dual row platforms and component
parts.
Care and Handling. Every effort shall be made to protect the platforms from weather elements,
dust, dirt, oil, grease, and acid. When available, a building should be used to store platforms.
Platforms will be stacked, utilizing dunnage, in a dry, well-ventilated location and protected from
pilferage, dampness, fire and dirt. Be careful not to damage side rails.
COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of Organization and
Equipment (MTOE) applicable to your unit.
SPECIAL TOOLS, TEST MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE), AND
SUPPORT EQUIPMENT
Special tools, TMDE and support equipment are not required.
REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
Repair parts are listed and illustrated in WP 0021 00 – WP 0032 00 of this manual.
END OF WORK PACKAGE
