TM 10-1670-268-20&P 0002 00
0002 00-10
LOCATION AND DESCRIPTION OF MINOR COMPONENTS OF THE DUAL ROW AIRDROP
PLATFORM
These minor components are installed on the platform to accommodate specific modes of airdrop.
Clevis Assembly. The clevis assembly is a round rod that is curved to fit over side rail bushing. It
becomes a closed ring in shape when the spacer, bolt, washer and nut are installed across the open end
of the clevis.
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS OF THE OUTRIGGER ASSEMBLY
Outrigger Assembly. The mast weighs approximately 80-lbs and is comprised of two components: (1)
the outrigger mast assembly, and (2) the outrigger foot assembly. The outrigger mast and foot are
pinned together by means of a removable pivot pin, and together make up the mast assembly. This
assembly can be used on either side of the platform. The mast and the foot need to be disassembled for
a two-person lift. The handle on the mast is at the center of balance and is designed to hold two hands.
A second handling location is the end of the mast at the pivot pin end. The mast assembly is pinned to
the Platform Fitting Assembly (PFA) by means of a removable pivot pin identical to that used to pin the
foot to the mast. The outrigger hardware has been designed so that all hardware items can be used at
either the right or left side of the platform. This hardware can also be installed on the Type V platform
system, when modified to accept the PFA.
1
2
CLEVIS
ASSEMBLY
