TM 10-1670-272-23&P 0044 00
0044 00-3
Column 5, Tools and Equipment. Column 5 specifies by code, those common tool sets (not individual
tools) and special tools (Test, Measurement, and Diagnostic Equipment (TMDE)), and support equipment
required to perform the designated function.
Column 6, Remarks. This column shall, when applicable, contain a letter code, in alphabetical order.
EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS, TABLE 2
Column 1, Reference Code. The tool and test equipment reference code correlates with a code used in
the MAC, Table 1, Column 5.
Column 2, Maintenance Category. The lowest category of maintenance authorized to use the tool or
test equipment.
Column 3, Nomenclature. Name or identification of the tool or test equipment.
Column 4, National Stock Number. The National stock number of the tool or test equipment.
Column 5, Tool Number. The manufacturer's part number.
EXPLANATION OF COLUMN IN REMARKS, TABLE 3
Column 1, Reference Code. The code recorded in column 6.
Column 2, Remarks. This column lists information pertinent to the maintenance function being
performed as indicated in the MAC.
Table 1. Maintenance Allocation Chart
(4)
MAINTENANCE LEVEL
UNIT
INTERMEDIATE
DEPOT
(1)
GROUP
NUMBER
(2)
COMPONENT/ASSEMBLY
(3)
MAINTENANCE
FUNCTION
C
O
F
H
D
(5)
TOOLS AND
EQUIPMENT
(6)
REMARKS
00
MC1-1B/MC1-1E
Parachute
Inspect
Service
Test
1.0
1.0
See table 2.,
in this WP.
A, B, C,
D, E, F, G
01
Canopy
Repair
Replace
0.5
0.3
See table 2.,
in this WP.
A, B, C,
E, F, G
0101
Bridle Loop
Repair
Replace
0.1
0.3
0102
Vent Cap
Repair
Replace
0.1
1.0
0103
Vent Line
Repair
Replace
0.1
0.5
0104
Upper Lateral Band
Repair
0.4
0105
Radial Seam
Repair
0.3
0106
Radial Tape
Replace
1.0
0107
Gore Section
Repair
Replace
0.4
1.0
F
