ARMY TM 10-1670-275-23&P
AIR FORCE TO 13C5-25-2
NAVY NAVAIR 13-1-26
UNIT, DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
C1. SCOPE. This Manual lists and authorizes spares and repair parts; special tools; special test,
measurement, and diagnostic equipment (TMDE); and other special support equipment required for
performance of organizational and, direct support maintenance of the 12-Foot Diameter, High-Velocity Cargo
Parachute.. It authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as
indicated by the source, maintenance and recoverability (SMR) codes.
C2. GENERAL. This Repair Parts and Special Tools List is divided into the following sections:
a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. This list also includes parts which must be removed for replacement of the
authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the
parts in each group listed in ascending figure and item number sequence. Bulk materials are listed.
b. Section III. Special Tools List. (Not Applicable). No special tools are required to assemble the 12-
foot diameter parachute. Common tools are listed in Appendix B, Section III because they are required for
performance of packing and maintenance procedures/tasks. These tools are authorized under Chapter 2,
paragraph 2-1 of this manual.
c. Section IV. Cross-Reference Index. A list, in National Item Identification Number (NIIN) sequence, of
all national stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all
part numbers appearing in the listings.
C3. EXPLANATION OF COLUMNS (SECTIONS II AND III).
a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position
code containing supply/requisitioning information, maintenance category authorization criteria, and disposition
instruction, as shown in the following breakout:
* Complete Rear: Maintenance capacity, capability, and authority to perform all corrective maintenance
tasks of the "Repair" function in a use/user environment in order to restore serviceability to a failed item.
C-1
APPENDIX C
