ARMY TM 10-1670-276-23&P
AIR FORCE T.O. 13C5-29-2
NAVY NAVAIR 13-1-29
Figure 2-15. Suspension Line Separation
i.
Assembling Components.
NOTE
When the parachute is received from the supply activity and before It is packed for use,
the components must be assembled. This must be accomplished during the layout of
parachute (para 2-16c) after removing inversion, turns, tangles or twists, if required. In
assembling components, if any component is found to be defective, parachute must be
processed for repair. Place components on the packing table and obtain proper layout of
canopy assembly. Then assemble components In accordance with the following:
(1) Attaching static line.
(a) It applicable, remove riser clevis from small loop on 15-foot long static line.
(b) Pass large loop located on one end of static line through deployment bag main strap attaching loop (0, figure
2-16).
(c) Pass opposite end of static line through large loop and draw formed loop tight against main strap attaching
loop.
2-31
