TM 10-1670-277-23&P 0001 00
0001 00-3
Destruction by Fire. Items that can be destroyed by fire shall be burned. The destruction of equipment by
use of fire is an effective method of destroying low-melting-point metal items (e.g., side rails, threaded
portions of nuts and bolts, and platform sheeting). However, mechanical destruction should be completed
first, whenever possible, before initiating destruction by fire. When items to be destroyed are made of metal,
textile materials (or some comparable low combustible material) should be packed under and around the
items, then soaked with a flammable petroleum product and ignited. Proper concentration of equipment,
which is suitable for burning, will provide a hotter and more destructive fire.
Destruction By Use of Natural Surroundings. Small vital parts of assemblies, which are easily accessible,
may be disposed of as follows: Disposal or denial of equipment to an enemy may be accomplished through
use of natural surroundings. Accessible vital parts may be removed and scattered through dense foliage,
buried in dirt or sand, or thrown into a lake, or other body of water. Total submersion of equipment in a body
of water will provide water damage as well as concealment. Salt water will inflict extensive damage to air
delivery equipment.
PREPARATION FOR STORAGE OR SHIPMENT
For storage, refer to TM 10-1670-201-23/T.O. 13C-1-41/NAVAIR 13-1-17, and WP 0053 00 of this manual; for
shipment, refer to WP 0054 00 of this manual.
WARRANTY INFORMATION
The 28-Foot Diameter, Cargo Extraction Parachute does not contain warranty provisions.
NOMENCLATURE CROSS-REFERENCE LIST
Common Name
Official Nomenclature
28-Foot Extraction Parachute
28-Foot Diameter, Cargo Extraction Parachute
LIST OF ACRONYMS AND ABBREVIATIONS
BOI
Basis of Issue
C/W
Complied With
CAGEC
Commercial and Government Entity Code
cm.
Centimeter
CPC
Corrosion Prevention and Control
DA
Department of the Army
DS
Direct Support
Dtd
Dated
EA
Each
EDS
Electrostatic Sensitive Discharge
EIR
Equipment Improvement Recommendation
F
Fahrenheit
FSC
Federal Supply Classification
FSCM
Federal Supply Code for Manufacturer
Ft.
Feet
IAW
In Accordance With
IN.
Inches
IP
In-Process Inspector
