TM 10-1670-277-23&P 0044 00
d. Make a ½-inch foldback on each raw edge. Pin and baste each foldback to complete prepared hole.
Basting will be performed using procedures in WP 0012 00, SEWING PROCEDURES.
e. Using duck cloth, mark and cut a patch 2½-inches wider and longer than inside measurements of the
prepared hole. Ensure that patch material is marked, and cut along the warp or filling of fabric.
Center patch material over prepared hole and ensure the warp or filling of patch material matches
warp or filling of fabric being patched. Pin patch material in position.
g. Make a ½-inch foldunder on each edge of patch material and baste patch to prepared area. Basting
will be performed using procedures in WP 0012 00, SEWING PROCEDURES.
h. Remove pushpins securing the item to repair table and secure the patch by stitching, using applicable
details in the illustration below and the stitching specifics outlined in applicable item maintenance
publication. Make first row of stitching completely around patch. Turn deployment bag inside out
and make second row of stitching around prepared hole. Stitching will be performed in according with
WP 0012 00, SEWING PROCEDURES.
4. Restenciling. As required, restencil identification markings using procedures in WP 0014 00, MARKING
END OF WORK PACKAGE