TM 10-1670-277-23&P
0056 00
0056 00-3
Column 5, Tools and Equipment. Column 5 specifies by code, those common tool sets (not individual
tools) and special tools (Test, Measurement, and Diagnostic Equipment (TMDE)), and support equipment
required to perform the designated function.
Column 6, Remarks. This column shall, when applicable, contain a letter code, in alphabetical order,
which shall be keyed to remarks contained in Table 3.
EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS, TABLE 2
Column 1, Reference Code. The tool and test equipment reference code correlates with a code used in
the MAC, Table 1, Column 5.
Column 2, Maintenance Category. The lowest category of maintenance authorized to use the tool or test
equipment.
Column 3, Nomenclature. Name or identification of the tool or test equipment.
Column 4, National Stock Number. The National stock number of the tool or test equipment.
Column 5, Tool Number. The manufacturers part number.
EXPLANATION OF COLUMN IN REMARKS, TABLE 3
Column 1, Reference Code. The code recorded in column 6, Table 1.
Column 2, Remarks. This column lists information pertinent to the maintenance function being performed
as indicated in the MAC.
Table 1. Maintenance Allocation Chart For
28-Foot Diameter, Cargo Extraction Parachute
(4)
MAINTENANCE LEVEL
UNIT
INTERMEDIATE
DEPOT
(1)
GROUP
NUMBER
(2)
COMPONENT/ASSEMBLY
(3)
MAINTENANCE
FUNCTION
C
O
F
H
D
(5)
TOOLS AND
EQUIPMENT
(6)
REMARKS
01
Canopy
Inspect
Service
Repair
0.8
1.0
0.4
A, B, C, D
0101
Vent Line
Repair
Replace
0.5
0.1
0102
Bridle Centering Line
Repair
Replace
0.3
0.5
0103
Upper Lateral Band
Repair
0.3
0104
Gore Section
Repair
Replace
0.4
0.8
D
0105
Radial Tape
Repair
0.4
0106
Vertical Tape
Repair
0.4
0107
Panel Edge
Reinforcement
Repair
0.4