ARMY TM 10-1670-278-23&P
AIR FORCE T.O. 13C5-26-2
NAVY NAVAIR 13-1-27
NOTE
Measuring from the outside edge of the upper lateral band, the vent line should
extend 4 inches into radial webbing.
(5) Using a zig-zag sewing machine and nylon thread, size E, stitch new line in place. Begin stitching on line
1/4-inch above upper edge of vent reinforcement tape and sew to 1/4 inch beyond end of line, 7 to 11
stitches per inch and 118 inch wide (figure 2-36).
(6) Pass remaining end of line under other vent lines, and through bridle loop and bridle centering loop as
required.
(7) Position and sew remaining end of line to opposite side of canopy as in steps (4) and (5) above.
Figure 2-36. Vent Line Replacement Details.
2-61