TM 10-1670-280-23&P 0046 00
0046 00-2
9. Bias-trim each tab end even with the upper edge of the lower lateral band.
10. Pull a suitable length of the suspension line up through the V-tab on the outside of the lower lateral band
and lay the pulled length to one side.
11. Secure the V-tab ends to the lower lateral band inside by stitching a single row of double-throw zig-zag
stitching along the center of material, making a V-shaped design.
12. Further stitch a single row of stitching 1/8-inch along the edges of the V-tab ends.