ARMY TM 10-1670-281-23&P
AIR FORCE T.O. 13C5-32-2
NAVY NAVAIR 13-1-32
(3) Cut a piece of 1-inch wide tubular nylon webbing long enough to extend 1 inch beyond outside edge
of second radial seam on each side of damaged area. Wax ends of webbing (para. 2-18).
(4) Center webbing over damaged area. Using a light duty sewing machine and size E nylon thread, sew
webbing in place with four continuous rows of stitching, 1/8 inch from edge of webbing, 7 to 11
stitches per inch. Overstitch ends of webbing 1/2 inch (B, figure 2-106).
(5) Reposition vent lines and sew in place according to original construction.
2-119
